EET Standard Pole

for surface grinding workholding applications


  • EDM-READY: fully submersible, brass sealed (More than 1000MΩ of insulation resistance)
  • Hard soldered top plate and solid bottom plate for maximum rigidity and accuracy. Low-profile design increases Z-axis stroke.
  • Strong magnetic workholding regulated by controller.
  • Controller demagnetizes workpiece.


EET series is our most popular electromagnetic chuck.

Click HERE for magnetic chuck controllers

Model Magnetic Force* Pole Pitch L x W x H Amps Weight
EET-1530 10,800 lbs. 15 (3+12) 6" x 12" x 3" 0.18 44 lbs.
EET-1535 12,600 lbs. 15 (3+12) 6" x 14" x 3" 0.19 53 lbs.
EET-1545 16,200 lbs. 15 (3+12) 6" x 18" x 3" 0.19 66 lbs.
EET-2040 19,200 lbs. 15 (3+12) 8" x 16" x 3" 0.28 84 lbs.
EET-2045 21,600 lbs. 15 (3+12) 8" x 18" x 3" 0.28 90 lbs.
EET-2050 24,000 lbs. 15 (3+12) 8" x 20" x 3" 0.36 99 lbs.
EET-2550 30,000 lbs. 15 (3+12) 10" x 20" x 3" 0.46 143 lbs.
EET-3060 43,200 lbs. 15 (3+12) 12" x 24" x 3" 0.86 179 lbs.
EET-3070 50,400 lbs. 15 (3+12) 12" x 28" x 3" 0.81 205 lbs.
EET-3090 63,000 lbs. 15 (3+12) 12" x 35" x 3" 1.05 276 lbs.
EET-4060 57,600 lbs. 19 (3+16) 16" x 24" x 3.5" 0.95 287 lbs.
EET-4070 67,200 lbs. 19 (3+16) 16" x 28" x 3.5" 1.21 333 lbs.
EET-4080 76,800 lbs. 19 (3+16) 16" x 32" x 3.5" 1.31 384 lbs.
EET-40100 96,000 lbs. 19 (3+16) 16" x 40" x 3.5" 1.33 487 lbs.
EET-50100 120,000 lbs. 19 (3+16) 20" x 40" x 3.5" 1.46 595 lbs.
EET-50150 180,000 lbs. 19 (3+16) 20" x 60" x 3.5" 3.37 893 lbs.
EET-60100 144,000 lbs. 19 (3+16) 24" x 40" x 3.5" 2.8 728 lbs.
EET-60150 216,000 lbs. 19 (3+16) 24" x 60" x 3.5" 2.85 1091 lbs.
EET-80100 192,000 lbs. 19 (3+16) 32" x 40" x 3.5" 3.8 970 lbs.

*Magnetic force regulated by controller. See page 9 for controllers. Questions? Call us at: (877) 354-3837.
VOLTS: DC90V